14 Golden Rules - Structure and Design Magazine (2024)

14 Golden Rules

14 Golden Rules - Structure and Design Magazine (4)

If you are considering to go the DIY way for your tiling, these 14 Golden Rules (and the top 10 reasons for tile fixing failures) will come in handy for your project.

  1. Tiles must be dry and the back of the tile clean.
  2. The surface being tiled should be true and even and free from grease, wax, oil, curing compounds, and all forms of contamination.
  3. Adhesive should be applied using the appropriate notched trowel. Do not use the spot fixing method, and always apply adhesive horizontally with a notched trowel, rather than in a swirling motion.
  4. The whole back of each tile must be in good contact with the adhesive. Press tiles firmly into the adhesive bed and ensure that no voids occurs beneath tiles. See rule 5…
  5. Every now and then, lift a tile from the adhesive to check that complete contact with the adhesive is being made.
  6. No not fix tiles over skinned adhesive.
  7. Allow the adhesive to set before grouting: usually no less than 24 hours. During this time the tiles must be protected from potentially harmful factors like weather and water penetration.
  8. Adhesives must be used strictly in accordance with the manufacturer’s instructions.
  9. To achieve greater adhesion and a longer open time, porous concrete should be dampened with water prior to tiling with cement based adhesives.
  10. Any loose powder on the backs of tiles should be removed.
  11. Appropriate movement joints must be used and construction joints must not be tiled over. See DIY Fact Sheet Wall and Floor Surfaces for more details.
  12. For thin bed fixing of tiles, the minimum finished thickness of the adhesive should not be less than 3mm.
  13. Hairline cracks of up to 2mm in concrete should be bridged. Clean and prime the surface, allow to dry, and apply a liberal coat of ABA Barrierflex as a one-to-one mixture. Inbed a reinforcement mat and immediately apply a second coat of Barrierflex. Allow to cure before tiling.
  14. Tiles must never be stored in direct sunlight prior to fixing.
14 Golden Rules - Structure and Design Magazine (2024)

FAQs

What are the golden rules of design? ›

One of the golden rules of graphic design is to keep it simple. This means using a limited color palette, avoiding cluttered layouts, and using clear and concise messaging. Another important rule is to maintain consistency in design elements such as fonts, spacing, and imagery.

What are the golden rules of tiling? ›

The golden rule is, try as much as possible to avoid small pieces of tile, or, try to keep them hidden. The same basic idea applies to the vertical lines of your job. Try to minimise any small cuts. It is best to start with a centre line and mark along your wall where each vertical joint will occur.

What are the 12 laws of design? ›

There are twelve basic principles of design: contrast, balance, emphasis, proportion, hierarchy, repetition, rhythm, pattern, white space, movement, variety, and unity. These visual and graphic design principles work together to create appealing and functional designs that make sense to users.

What is the golden design rule? ›

The Golden Design Rules were developed by the Consumer Goods Forum to address which plastics should be primarily used for packaging and specific design elements. The purpose is to eliminate unnecessary plastics and increase the value of plastics in the marketplace.

What is the 3 4 5 rule for tiling? ›

To get a perfectly square corner, you want to aim for a measurement ratio of 3:4:5. In other words, you want a three-foot length on your straight line, a four-foot length on your perpendicular line, and a five-foot length across. If all three measurements are correct, you'll have a perfectly square corner.

What is Fibonacci tiling? ›

Fibonacci Tiling

The Fibonacci tiles are sprites that have square images. The square image sides are the length of the current Fibonacci number. As each square sprite is created, they are placed next to the previous square in a counter-clockwise pattern.

What is the golden principle of design? ›

The golden ratio is all about blank space and its relation to the 'pay attention' space,” says Berndt. “There's only so much that people can take visually. This is a guiding principle to help you understand the limits of human attention so you can create something that is aesthetically pleasing.”

What are the 4 basic design rules? ›

Maintaining your creativity when designing content can be a challenge. Luckily, there are four major design principles that can help guide your ideas. These principles are contrast, repetition, alignment, and proximity. Understanding the role each can play in the design process can help keep your ideas fresh.

What are the 5 rules of design? ›

Here are five basic design principles that will help you evaluate the quality of any design.
  • Consistency. One of the most fundamental concepts behind a brand is that it's made up of similar, recognizable visual concepts. ...
  • Contrast. A simple yet crucial part of design is contrast. ...
  • Alignment. ...
  • Hierarchy. ...
  • Balance and space.

What are golden 4 rules in design process? ›

The UI design principals are: Place users in control of the interface Make it comfortable to interact with a product Reduce cognitive load Make user interfaces consistent 1. Place users in control of the interface Good UIs instill a sense of control in their users.

References

Top Articles
Latest Posts
Article information

Author: Delena Feil

Last Updated:

Views: 5781

Rating: 4.4 / 5 (45 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Delena Feil

Birthday: 1998-08-29

Address: 747 Lubowitz Run, Sidmouth, HI 90646-5543

Phone: +99513241752844

Job: Design Supervisor

Hobby: Digital arts, Lacemaking, Air sports, Running, Scouting, Shooting, Puzzles

Introduction: My name is Delena Feil, I am a clean, splendid, calm, fancy, jolly, bright, faithful person who loves writing and wants to share my knowledge and understanding with you.