Grill Master Secrets: Can You Cut a Brisket in Half? (2024)

If you are a fan of smoked brisket and want to avoid putting the full packer on the grill, you might be wondering: can you cut the brisket in half? Cutting brisket in half is the most logical thing to do. You may not need the whole primal cut, or the size can be too big for a smoker. If you cut it in half you'll also speed up the cooking process, and you can still cook it to perfection.

This article will answer your common brisket question. We will discuss how to do it and why it's actually better to cut brisket in half.

What is a Brisket?

Grill Master Secrets: Can You Cut a Brisket in Half? (1)

Brisket is one of the best cuts of a steer for slow cooking. It has lots of marbling, tendons, and muscles, so you will need a lot of time to cook it. Once you cook it perfectly, it melts in the mouth and gives a perfect beefy flavor.

Brisket is a large portion of meat. Butchers obtain brisket from a cow's lower chest located near the front leg. Read in detail about other beef cuts. That is why brisket is one of the cow's most-used muscles and will be tough for you to cook.

The best way to cook a brisket is to cook it on slow heat for many hours. The slow heat breaks the tough tissues, and there is no risk of overcooking the meat.

Can You Cut a Brisket in Half?

Grill Master Secrets: Can You Cut a Brisket in Half? (2)

Brisket is very large. Generally, the size of brisket is around 15-18 pounds, but it can even weigh in around 20 pounds! You can cut it into subprimal cuts, which is more convenient to cook. But to cook the perfect piece of meat, you must know the anatomy of a brisket.

Butchers refer to the whole brisket as a full packer. It consists of two subprimal cuts that are known as the point and the flat, and you can cut the brisket in half by separating the flat part from the point.

The point is the piece is directly attached to the ribcage. It's a thick cut with dense meat and lots of fat hunks and marbling.

A flat is a rectangular piece attached to the point through a thick layer of fat. The flat part makes up the majority of brisket. It has a thick layer of fat on the top that protect the meat from drying out, but you need to trim some of the fat, or you won't be able to obtain a crisp, flavorful crust.

Read more here about untrimmed brisket. Chefs use the cut in corned beef, and you will need to cook it at a low temperature for a long time because it has tough tissues that take time to tender.

It has connective tissues and layers of fat as well. However, it contains less fat than the point, and you can cut the flat into uniform slices for steaks.

Grocery stores sell briskets; the half pack you may find is usually the flat portion.

Why Is It Important to Cut a Brisket In Half?

Grill Master Secrets: Can You Cut a Brisket in Half? (3)

Cutting the brisket in half is recommended for many reasons:

Fewer Guests

Unless you are feeding a crowd, brisket can be too large. The average size of brisket is 15-18 pounds, and some can be up to 20 pounds. On average, you need one pound per person, so a whole packer of 15 lb is enough to feed 15 people.

Too Big For the Grill

Cooking the whole brisket is not only difficult, but it may not fit on the smoker. Moreover, one large hunk of meat will restrict the airflow in your smoker, so it will be easier to manage if you cut it into subprimal cuts.

Cooking Time

A whole brisket takes a long time to cook. For example, it can take 10-12 hours to cook for a whole portion. As we have already mentioned, both flat and point portions of brisket have different types of meat, fat content, and connective tissues.

The flat portion is more uniform and has less cooking time than the point, which has lots of marbling and tough tissues. Therefore, you must vary the cooking time to cook each portion to perfection.

In conclusion, if you cut brisket in half, you can cook both pieces at their optimal time and temperature. The smaller portions are easier to handle, and you won't have too many leftovers.

How To Cut Brisket In Half?

For efficient smoking, we recommend cutting brisket in half. You can separate the flat portion from the point.

Grill Master Secrets: Can You Cut a Brisket in Half? (4)

How to Cut the Brisket: Identifying the Point And Flat

Lay the brisket in front of you with the thick fat side down. We have already mentioned the flat side is flat, and the thick, dense part is the point. Consequently, to separate them, you need to look for the thick fat layer that separates the flat from the point.

Once you see the thick fat layer that separates the flat portion from the point, you can take a boning knife, or even a chef knife (on Amazon) will do the job. If you don't yet have a high-quality chef knife, make sure you check out our made in USA chef knife.

Trim the thick layer of fat on the point. If you cut too much fat, the meat will be dry, but leaving too much fat on will not allow the seasoning to penetrate the meat. Check out this simple brisket seasoning recipe if you aren't sure how to season your meat.

For the best result, you should leave a quarter of an inchof fat on the meat (so it doesn't dry out during cooking).

Insert the knife into the layer of fat that is joining the two parts. Separate the flat portion from the point. The next step is to trim the fat from both portions (see our guide on how to trim a brisketwith full step-by-step pictures).

How Long Does It Take to Cook A Flat Portion of Brisket?

The flat portion of brisket can take 4-5 hours or until the internal temperature of the meat reaches 195 degrees F.

How Long Does It Take To Cook The Point Portion of a Brisket?

A brisket point is tougher meat and may take longer to cook. It can take 6-8 hours to be cooked to perfection. However, it depends on the size of the brisket point as well. It usually takes one hour per pound. So, for a brisket point of 5 pounds, you may need five hours minimum to cook it correctly. The internal temperature of the thickest part should be 195 degrees F.

Final Words

Cutting the brisket in half is necessary at times. Smaller portions are easier to cook, and you will have an easier time cooking the meat perfectly since each half requires a different amount of time. And most importantly, you can fit half-portions in a smoker more easily than a full packer. The flat portion goes well for corned beef, and the point is more suitable for slicing meat for burgers or sandwiches. Both are extremely flavorful and rich if cooked on slow heat for a long time.

Related Articles

What is an Untrimmed Brisket?

Best Cutting Boards for Brisket

Beef Cuts: Complete Guide

RELATED PRODUCTS YOU MIGHT LIKE

View ourentire collection of dark wood walnut reversible boards(on Amazon)- there are many shapes and sizes to choose from. Find your perfect board for your next steak, bbq, stew, or smoked meat!

If you're thinking of cooking a brisket, you'll definitely need our extra-large 18 inch x 24 inch cutting board.

See Virginia Boys Kitchens On Amazon

We are on Amazon, see our storefront here. Use coupon code VBKBLOG10 for 10% off your entire purchase of any Virginia Boys Kitchens on Amazon. Apply the code at checkout.

Grill Master Secrets: Can You Cut a Brisket in Half? (5)

Grill Master Secrets: Can You Cut a Brisket in Half? (2024)

FAQs

Grill Master Secrets: Can You Cut a Brisket in Half? ›

Butchers refer to the whole brisket as a full packer. It consists of two subprimal cuts that are known as the point and the flat, and you can cut the brisket in half by separating the flat part from the point. The point is the piece is directly attached to the ribcage.

Can I cut brisket in half to fit in a smoker? ›

Cutting a brisket in half can be beneficial for various reasons. It allows for more manageable cooking, especially if you have a smaller grill or smoker. Additionally, smaller portions are easier to handle when serving, and cutting a brisket in half can also help it cook more evenly.

Can I cut a brisket in half and freeze it? ›

It is advisable to use the cut halves within a few days or freeze them for longer storage.

What is the best way to cut a brisket? ›

The most important step in slicing cooked brisket is to cut thinly across the grain. Meat is made up of long muscle fibers, and the grain of the meat is how these fibers align. For tender brisket you'll need to slice across the fibers; if you slice with the grain you'll have stringy, chewy meat.

Should I split my brisket? ›

While you can cook a brisket whole, it's acceptable (and my preference) to cook the two different muscles separately.

What temp does brisket fall apart? ›

Brisket can be done in a range of 200-210°F (93-99°C), but as a general rule, it's safe to bet on 203°F (95°C). Brisket should be tender but not so tender it's falling apart. You should be able to slice it into pieces that can just hold together, requiring a little pull to come apart.

Do smaller briskets cook faster? ›

You still need to check the tenderness with a knife, a probe, or by jiggling the whole thing. We cooked one easily within a workday, clocking in at about 6.5 hours. But it was a 16 lb packer—a smaller piece would cook faster.

Can I cut a brisket lengthwise? ›

Cutting lengthwise works fine though you might get tougher edges depending on your cooker/cooking method.

Is it OK to slice brisket cold? ›

Far better than letting your brisket sit for a minimum of 15 minutes is refrigerating it overnight and slicing it cold. This will produce beautiful thin slices in a way that slicing the ever-so-slightly-rested, semi-warm, soft brisket never can – if not sliced cold brisket often shreds.

Should I slice smoked brisket before freezing? ›

The next day, it's time to prepare the meat for freezing. Remove the brisket from the fridge, take it out of the liquid, and slice it up. It's easier to do this when the beef is cold, as it holds together better.

What is the 3 2 1 rule for brisket? ›

Often used for other meats that require long, slow cooking on the barbecue, such as ribs, the 3-2-1 method essentially involves firstly smoking the meat as it is for three hours, wrapping it for the second two hours, and finally finishing the cooking unwrapped for the last hour.

How do you cut a brisket for slow cooking? ›

Trim the Brisket Flat Fat Cap
  1. Trim the Fat in Layers. With the exposed flat meat facing you, trim the top fat cap in layers. ...
  2. Aim for an Even Trim. Repeat this process across the entire flat until the whole fat cap is about ¼” thick. ...
  3. Round off the Brisket Edges.

What is the best temperature to cut brisket? ›

205°F (96°C): Many pitmasters aim for this precise temperature as it often results in a beautifully tender and succulent brisket. At this point, the meat has typically gone through the stall (a period when the internal temperature plateaus) and is ready for slicing.

Can I cut a brisket in half? ›

Butchers refer to the whole brisket as a full packer. It consists of two subprimal cuts that are known as the point and the flat, and you can cut the brisket in half by separating the flat part from the point. The point is the piece is directly attached to the ribcage.

Why does brisket dry out after cutting? ›

Slicing it too thin will make it more prone to drying out. Rest your meat. After you've finished cooking your brisket, it's important to let it rest for at least 30 minutes before slicing and serving. This will allow the juices to redistribute throughout the meat and make it more moist and flavorful.

What is the point half of the brisket? ›

The less lean half of the whole Brisket that's juicy with full flavor. The anterior Point portion of the Brisket, thus the name “Point.”

What to do if brisket is too big for a smoker? ›

Smoke Temperature Log Adobe Acrobat Reader) If the brisket is too large for your smoker, just fold a portion of the flat back under the brisket. Don't place the item on the bottom shelf unless absolutely necessary, this is the hottest tray since it's closest to the heat source.

Does size of brisket matter for smoking? ›

Unfortunately, smaller briskets just don't have enough fat in them...and on them...to achieve the taste we want. So, staying true to the roots of Central Texas style brisket, we start with a whole brisket or “packer” with a weight between 16 and 17 pounds.

How do you smoke a partial brisket? ›

You will want to smoke the cut for about 4 to 5 hours at 220 F to 240 F. If using a water smoker, put the remaining marinade in the water pan to add flavor. Place brisket on the smoker and cook until the internal temperature reaches 180 F/80 C. Check the temperature at the 4-hour mark.

How long to smoke a small trimmed brisket? ›

How Long To Smoke A Brisket
  1. Smoke a 10 lbs brisket for 6-9 hrs and then rest for at least 1 hour.
  2. Smoke a 15 lbs brisket for 10-12 hrs and then rest for at least 1 hour.
  3. Smoke a 20 lbs brisket for 12-16 hrs and then rest for at least 1 hour.

References

Top Articles
Latest Posts
Article information

Author: Kelle Weber

Last Updated:

Views: 6745

Rating: 4.2 / 5 (53 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Kelle Weber

Birthday: 2000-08-05

Address: 6796 Juan Square, Markfort, MN 58988

Phone: +8215934114615

Job: Hospitality Director

Hobby: tabletop games, Foreign language learning, Leather crafting, Horseback riding, Swimming, Knapping, Handball

Introduction: My name is Kelle Weber, I am a magnificent, enchanting, fair, joyous, light, determined, joyous person who loves writing and wants to share my knowledge and understanding with you.