How To Add Privacy Screen To Existing Deck? - Today's Homeowner (2024)

by Matt Greenfield

If you enjoy relaxing on your deck, adding a privacy screen to it can make it more comfortable since you will no longer be on show.

Generally, there are several outdoor privacy screen designs for decks in the world of home decoration, and today you’re going to learn more about one of those methods.

Why You’ll Want A Deck Privacy Screen?

Privacy is precious no matter what environment you are in, and it does not feel comfortable to know that you are being watched. You’ll want a privacy screen to enjoy your personal experiences without anyone bothering you.

Suppose you’re cooking a barbeque for you and your family. When you notice that your neighbors are looking at you, they might give you the impression that you should invite them over. You can’t ignore them because they might think you’re being a snob.

Steps To Build A Privacy Screen On An Existing Deck

So, you want to build a privacy screen. You’re going to need help with that. Here is how you can build it yourself.

What You’ll Need


  • Circular saw
  • Drill bit set
  • Drill/driver
  • Hammer
  • Handsaw
  • Level
  • Pry bar
  • Safety glasses
  • Sawhorses
  • Speed square
  • Stepladder
  • Tape measure


  • 3-1/2-in. galvanized screws
  • 3-in. galvanized screws
  • 4d galvanized nails
  • 6d galvanized nails
  • Lumber

Steps To Follow

These measurements might not fit your deck, so ensure that you apply these steps to suit your deck.

First, figure out how you’ll connect your new privacy screen to your old railing. Increase the distance of each of the posts you’re about to build. Adding a half slat on top and below the last panel needs to be a little bigger. Make sure that you cut the old railing of the fence that links to it.

To create a new privacy fence, carefully disassemble the current railing components. It could be easier to cut the old railing into chunks with a saw. Avoid using hammers or pry bars to damage the margins of the deck, and make sure any exposed screws or nails are removed.

You’ll be able to cut all of the posts and rails ahead of time. It’s preferable to cut the remaining things on the cutting list as needed to ensure a perfect fit. Keep in mind that the length is affected by the thickness of the wood.

After notching the cedar 24 posts, cut them to length. Make sure you cut a 30-degree angle or match an existing angle below each post. Notch the tall and short sections to fit over the edge of the deck.

Attach the lower and upper rails at an angle with 3-inch galvanized screws. This procedure is known as toe screwing.

From broader cedar boards, mark your cut and rip-cut or saw lengthwise the horizontal trim and cleats to the measurements specified in the Cutting List. It’s good to note that you might be able to have them cut for you at your local lumberyard.

Nail the cleats to the rail components and the bottom of every top rail. Each component should be secured with four 4d galvanized nails.

Add 26 (or wider) box bridging between the two outer joists to reinforce the rim against strong winds. Three 3-1/2 inch screws secure the bridging to each joist.

Cut each bridging piece to tightly fit between the outer joist before working on the next inner joist. You will stiffen the rim joist, and the fence will not waver due to the boxing.

Privacy Screen Ideas You Can Apply On Your Deck

If you cannot add a privacy screen with the method above, you might want to consider a few other alternatives.

Existing fences can act as a guide for this project. Rolls of bamboo and other reed grasses, for example. For a fast and easy privacy screen with an exotic flair, unroll the bamboo and strap it to your deck railing.

If you don’t want to use bamboo, you can use fabric screen straps for a more temporary privacy screen. Artificial hedges would also look great from a distance. Or you could use real plants if you plan on having a garden.

Wooden Slats can make a privacy screen when you don’t have an existing fence. It matches other wooden accents on your yard or deck for a more aesthetic vibe.

The cedar planter box and privacy screen pictured above would be a terrific way to give your deck some more seclusion. And this could look good whether you have a current railing or not.

If you have overhead covering, why not try to install outdoor curtains? These might be a paint to wash during rainy seasons, but when it’s sunny out, these curtains are the perfect cover for you.

Enjoy Your Deck With Privacy

If you can’t build a privacy screen yourself, there’s always the option to hire others to do it for you. Although, you could find some of these options on online listings for sale. Once you’re all set up, all you have to do is bask in your new profound privacy.

How To Add Privacy Screen To Existing Deck? - Today's Homeowner (1)

Matt Greenfield

Matt Greenfield is an experienced writer specializing in home improvement topics. He has a passion for educating and empowering homeowners to make informed decisions about their properties. Matt's writing focuses on a range of topics, including windows, flooring, HVAC, and construction materials. With a background in construction and home renovation, Matt is well-versed in the latest trends and techniques in the industry. His articles offer practical advice and expert insights that help readers tackle their home improvement projects with confidence. Whether you're a DIY enthusiast or a seasoned professional, Matt's writing is sure to provide valuable guidance and inspiration.

Learn More

How To Add Privacy Screen To Existing Deck? - Today's Homeowner (2024)


Top Articles
Latest Posts
Article information

Author: Mrs. Angelic Larkin

Last Updated:

Views: 5993

Rating: 4.7 / 5 (47 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Mrs. Angelic Larkin

Birthday: 1992-06-28

Address: Apt. 413 8275 Mueller Overpass, South Magnolia, IA 99527-6023

Phone: +6824704719725

Job: District Real-Estate Facilitator

Hobby: Letterboxing, Vacation, Poi, Homebrewing, Mountain biking, Slacklining, Cabaret

Introduction: My name is Mrs. Angelic Larkin, I am a cute, charming, funny, determined, inexpensive, joyous, cheerful person who loves writing and wants to share my knowledge and understanding with you.