How to Lay Out Recessed Lighting (2024)

1

Determine Your Lighting Application

How to Lay Out Recessed Lighting (1)

When planning your recessed lighting layout, the first step is to determine your end goal. Think about the function the light will serve.

There are four main purposes for lighting:

  • General lighting: Bright, even light pattern that illuminates overall room or area
  • Accent and task lighting: Bright, focused light to highlight a single small area
  • Wall wash: Emphasizes a wide vertical surface, such as a wall with a fireplace or large wall art
  • Specialty lighting: Specific trims, typically for wet locations such as a shower or steam room.

Therecessed lighting housingtype you need is based on the type of installation you’ll be doing. New construction housing should be used if the ceiling is accessible. If the ceiling is not accessible, you must use remodel housing. For example, if you have a drop ceiling, you would use remodel housing. Additionally, if the housing will be in direct contact with insulation, you must use IC-rated housing.If you're using non-IC housing, insulation must be at least 3 inches away from all sides of the housing.

Beyond that, the size andrecessed lighting trimstyle of your housing comes down to a matter of preference and the lighting effect you’d like to achieve.

Recessed lighting housing is available in three sizes:

  • 6-inch: The most common size, 6-inch recessed lighting housing can be used for all applications.
  • 5-inch: This size housing fits more tightly around the bulb. It can be used for all lighting applications.
  • 3-inch/4-inch: The smallest sizes of housing are used mainly for small areas.

Recessed lighting trim styles vary.

  • Reflector styles maximize light output.
  • Baffle styles minimizes glare. The baffle style is most popular.
  • Eyeball styles provide adjustable directional lighting.
  • Open styles offer an economical option with an appealing finished look.
  • Lens styles diffuse the light and shield the lamp. This style is used for closets, porches and shower lights.
How to Lay Out Recessed Lighting (2)

Take the measurements of your room. Then sketch the general dimensions of the space on grid paper. Be sure to mark the placement of items such as workspaces, counters, shelves and furniture. If you want to light a wall hanging or other artwork, add it to the sketch.

Make the room's focal point the start of your recessed lighting layout plan. Your focal point might be a kitchen workspace or a painting on the wall. Build your plan outward from there. If you don’t have a specific focal point, simply start your lighting plan from the center of the room.

3

Calculate Lighting Placement

How to Lay Out Recessed Lighting (3)

Figuring out recessed lighting spacing requires a bit of measuring and some simple math. A good general rule for placement is to divide the height of the ceiling by two. The result is the amount of space to leave between each light.

For example, recessed lighting spacing for a room with an 8-foot-high ceiling would be 4 feet between each light. This will provide good spacing for general room lighting. Remember that ideal light placement can differ from room to room.

Proper placement of recessed lighting in a kitchen may require a more creative layout, since much of the light needed there is task oriented.Counter areas can be downlit to provide light and create minimal shadows for people working in the space. Try aiming the lights toward the edges of counters so the light pools ahead of where a person would normally stand. Leaving about 14 to 18 inches of space between the light cannisters and the cabinets will also help avoid lost light in a kitchen.

Knowing how to lay out recessed lighting is the first step in upgrading the lights in your home. Think about what purpose your new lights will serve. Then make a quick drawing of the room where the lights will go. Then make some measurements in the room to figure out the best lighting placement. Once you have a solid plan in place, you can choose the type of recessed lights that will work best.

Need help identifying a tool or material to help you figure how to lay out recessing lighting? Find products fast withimage searchin The Home Depot app. Snap a picture of an item you like, and we'll show you similar products.

How to Lay Out Recessed Lighting (2024)

FAQs

What is the best layout for recessed lighting? ›

A good general rule for placement is to divide the height of the ceiling by two. The result is the amount of space to leave between each light. For example, recessed lighting spacing for a room with an 8-foot-high ceiling would be 4 feet between each light. This will provide good spacing for general room lighting.

How do you distribute recessed lights? ›

By dividing the total height of your ceiling in half, you get the amount of space you should leave between each light. For example, recessed lighting spacing for a 16-foot-high ceiling would be 8 feet between each light. This will provide good spacing for the overall illumination of the room.

How far apart should 4 inch recessed lights be spaced? ›

4-inche Recessed Lights

It's recommended to maintain a distance of 4 to 5 feet between each recessed light. The distance from the wall to the fixture should be approximately 2.5 feet to ensure even light distribution and prevent shadowed areas.

Should you stagger recessed lights? ›

Tips for Effective Recessed Light Placement in Kitchens

Avoid Shadows: Position lights to minimize shadows, especially over work areas. Stagger lights to create overlapping light zones. Uniform Illumination: Ensure an even diffusion of light by using the same bulbs and fixtures throughout the kitchen.

How many recessed lights do I need for a 12x12 room? ›

How Many Recessed Lights? In general, a 12x12 kitchen will use a minimum of three to a maximum of nine recessed lights to illuminate the needed area.

How many 6 recessed lights do I need? ›

For example, for a 6-inch light, typically, the number is 1.5, which should be multiplied by the ceiling height. So, if your ceiling is 8 feet tall, multiplied by 1.5, the maximum space between each light should be 12 feet.

How many recessed lights per sq ft? ›

Room Dimensions

For example, in a room measuring 15 feet by 20 feet with an 8-foot ceiling, you'll need to calculate the area to estimate lighting requirements. Typically, one recessed light per 4-6 square feet of space is a useful guideline, though actual needs may vary based on additional considerations.

How do you plan and install recessed lighting? ›

  1. Turn Off the Power to the Room. ...
  2. Remove Standard Electrical Ceiling Boxes. ...
  3. Mark All Holes & Cut. ...
  4. Connect Wires to the Recessed Light. ...
  5. Install the Recessed Light Housing. ...
  6. Attach Recessed Light Trim. ...
  7. Adding the Light Bulb. ...
  8. Restore Power to Your Fixture.

How far away from cabinets should recessed lighting be? ›

Place your recessed downlights 12″ apart from each other and 12″ to 18″ away from any cabinets to illuminate counter areas.

Can recessed lights be too close together? ›

Alternately, if they are too close, the lighting can wash out the room or create glare, and the space will be overlit.

How much area does a 6 inch recessed light cover? ›

6 inch recessed lights typically cover about 6 feet of space. Depending on the size of your room, you may space your lights according to the formula recommended above (the ceiling height divided by 2 is the distance between the lights).

How far apart should recessed spotlights be spaced? ›

A good rule is to divide your ceiling height by 2 to give you the space between each light, but don't go more than 6 feet apart, or you'll lose the impact.

What are the guidelines for recessed lighting placement? ›

Follow the ceiling height rule of thumb.

To determine how far apart recessed lighting should be in bedrooms, kitchens and living rooms, divide the height of the ceiling by 2 and use that as your light spacing. For example, if a room has 8-foot high ceilings, recessed lighting should be spaced roughly 4 feet apart.

Is it OK to daisy chain recessed lights? ›

A daisy chain connects multiple light fixtures to the same circuit. It's useful for recessed lighting, illuminating rooms, and connecting lights to the same switch.

What is the best house layout for light? ›

It's smart to put your most-used rooms facing south, so they always feel bright and warm. Open floor plans allow any natural light to shine further. Large mirrors multiply natural light by bouncing it back at the viewer. Lighting variety, with different light levels at various heights throughout each room.

What rooms are best for recessed lighting? ›

Recessed lighting provides excellent overall illumination for a living room. These compact fixtures are great for lower ceilings as they don't add additional depth. Recessed lights can be used as part of an overall lighting scheme that combines task and ambient lighting.

References

Top Articles
Latest Posts
Article information

Author: Mrs. Angelic Larkin

Last Updated:

Views: 6570

Rating: 4.7 / 5 (67 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Mrs. Angelic Larkin

Birthday: 1992-06-28

Address: Apt. 413 8275 Mueller Overpass, South Magnolia, IA 99527-6023

Phone: +6824704719725

Job: District Real-Estate Facilitator

Hobby: Letterboxing, Vacation, Poi, Homebrewing, Mountain biking, Slacklining, Cabaret

Introduction: My name is Mrs. Angelic Larkin, I am a cute, charming, funny, determined, inexpensive, joyous, cheerful person who loves writing and wants to share my knowledge and understanding with you.