Working with Clay (2024)

Clay. Teachers either love it or hate it.
In the beginning I honestly just feared it. I had some weird deep-rooted fear that if utter chaos was ever to break out in my classroom - it would probably be during a clay lesson. Clay does has the potential to be a really messy material with your kids - but if you know how to handle things... you're golden.
Kids LOVE clay!
1. They get to build something with their hands.
2. Art class is probably the only time they ever get to use it.
3. They treasure their finished piece of artwork. It doesn't get crumpled up in the bottom of their bookbag because they're too busy admiring it and showing it off to their friends!

Clay is also a GREAT motivational tool for misbehaving classes.
"If we can't listen and follow directions then I don't think we're ready to work with CLAY."
**instant silence**

I wish there was a class in college where they taught us how to manage certain materials in your classroom. Wouldn't that have been useful!?
Either way.. this post is dedicated to all those student teachers and first-year teachers - hopefully the things that I've learned over the years will help you out! :)

Working with Clay (1)This year I started showing my students (3rd-5th grade)this PowerPointbefore we started working with clay. It's a super brief intro to clay and the 4 basic techniques used (pinch, coil, slab, and wheel). The last slide (The Journey of Clay) helps to explain to students why it takes a while to get their clay projects back. **The images used for this PowerPoint were all just pulled from google searches.

Clay tips you might find useful:

Working with Clay (2)1. Prep your clay BEFORE class. This way you can make sure that you have enough clay, that the amount of clay you are giving each student is sufficient, and you don't have to waste time carving it out during class. *Although my students are amazed to see how I cut clay with a wire cutter!
Once I prep my clay I store it in a plastic container. This year I even found a large Ziplock container which has helped to keep my clay super fresh!

Working with Clay (3)

2. Keep clay fresh in it's bag by using a binder clip to hold it closed! It's way easier to put on and take off than rubber bands and it will hold your bag closed tightly!

Working with Clay (4)

3. Don't fret over not having legit clay tools - at least at the elementary level. Unfolded paper clip ends, popsicle sticks, and straws will likely suffice for most of your projects.

Working with Clay (5)

4. Have your students stamp their initials into their projects! For YEARS I had my students try to write in their initials with a paperclip and 60% of the time I couldn't read it. Then one day I was wandering around Michael's and saw some alphabet stamps on sale. BOOM.

Working with Clay (6)

5. Don't work directly on your tables - unless you love spending a ridiculous amount of time cleaning up that streaky residue that clay leaves behind! At my last school I cut up sheets of canvas for my students to work on top of and it was GREAT! This year being at a new school I didn't have room in my budget for canvas.. so I bought a large tarp instead and cut it down into smaller pieces. Each student gets their own tarp to work on top of, then at the end of class student's shake their tarp overtop of the trash can (to get rid of the clay crumbs) and then return the tarp piece to its box.

Working with Clay (7)

6. When firing in the kiln, be sure to write down (I do it on an index card) which class is on which shelf. You'd be surprised how quickly things can get mixed up when you have several classes doing clay at the same time!

Clearly this is not an exhaustive list.. but hopefully these few ideas will help you out. :)

Working with Clay (2024)

FAQs

Is inhaling clay dust bad? ›

Clay. Inhalation of all clay materials especially silica can damage your lungs. All clay bodies contain some free crystalline silica which can scar your lung tissue and cause irreversible loss of breathing capacity. Free crystalline silica is present in clay bodies from trace to 50% amounts.

Will wet air dry clay stick to dry clay? ›

Unknowing, forgetful or pig-headed beginners may be able to join a wet piece of clay to a near bone-dry piece (typically something they have been working on for days and have let dry out too much), but in the end, no matter what they do, the wet clay will shrink more than the drier clay and all their effort will ...

Is working with clay good for arthritis? ›

The Mayo Clinic recommends that those with arthritis do low-impact exercises to help combat joint pain and promote joint dexterity. One good, low-impact exercise for the hands–a common area for joint pain–is clay throwing on a pottery wheel or hand-building ceramics.

Why is my clay so hard to work with? ›

Warming your clay helps make this easier. Use body heat, or a heating pad, or submerge clay (in a baggie) into hot tap water. Craft store clay is often hard when you buy it due to slower turnover. The freshest clay comes from quality online suppliers.

Why did my clay explode in the kiln? ›

Kiln explosions are essentially the result of internal pressure surpassing the structural limits of pottery within the kiln. These events transpire when the build-up of pressure, often from steam generated by moisture within the clay or from gases released during the firing process, finds no avenue for escape.

What do you spray on air dry clay? ›

The best option to provide a water-resistant, durable seal on air dry clay objects is to use a polyurethane or acrylic sealer. These provide a durable, water-resistant finish to protect the air dry clay and prevent it from yellowing.

What not to do with air dry clay? ›

Air-Dry Clay is similar to a porcelain clay body when wet and can be thrown on a potter's wheel by intermediate and advanced students. However, it should never be fired in a kiln or painted with traditional glazes.

Is it OK to add water to air dry clay? ›

Air drying clay is different to typical clay, so begin by breaking off gradual pieces. Make sure that the pieces are paper-thin and then add a tablespoon of water to around a tablespoon of clay, then leave it for a few hours to dry. Water can be added to your air dry clay to change the consistency.

What do I need to know before working with clay? ›

Basic tips

Water should never be added directly onto the clay. If clay is used to wrap rigid interior supports, it is recommended to first cover the surface with paper or cloth. The water in the clay evaporates during the drying process and causes shrinkage that can lead to cracks or fissures.

References

Top Articles
Latest Posts
Article information

Author: The Hon. Margery Christiansen

Last Updated:

Views: 5726

Rating: 5 / 5 (50 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: The Hon. Margery Christiansen

Birthday: 2000-07-07

Address: 5050 Breitenberg Knoll, New Robert, MI 45409

Phone: +2556892639372

Job: Investor Mining Engineer

Hobby: Sketching, Cosplaying, Glassblowing, Genealogy, Crocheting, Archery, Skateboarding

Introduction: My name is The Hon. Margery Christiansen, I am a bright, adorable, precious, inexpensive, gorgeous, comfortable, happy person who loves writing and wants to share my knowledge and understanding with you.